Titanium Anode For Swimming Pool

Base Material: Titanium (Gr1, Gr2)

Shape: rod, strip, disc, plate, mesh, wire, tube or combinations and or assemblies of these materials. (customized)

Typical working conditions:

Recommended salt concentration: 3-4 g/l

Water temperature: from 25 to 37 °C

PH: 6-8

Titanium Anode For Swimming Pool

Chlorine dioxide disinfection is largely used in swimming pool. It was divided into two kinds of electrolytic and chemical methods. Electrolysis is the raw materials used NaCl, chemical raw materials used is HCL. Commonly used in swimming pool water treatment is electrolysis ClO2 disinfection, and not by chemical ClO2 disinfection. This is because ClO2 generated by chemical method is a selective strong oxidant, it is in the sterilization process does not react with organic matter, are often excessive water and urea Chroma problems. The ClO2 generated by electrolysis of salt produced by electrolysis Cl2, ClO2, O3, HO2 and other high oxygen, and in the process is no longer supported by long-term use of chlorine disinfectant.

Chlorine disinfectants are often used: Cl2, NaClO, CaClO (Han Na), chlorine tablets, dichloroisocyanurate, TCCA. Cl2 although the most suitable pool, all the chlorine disinfection is the most economical, the best disinfectant.

In the last few years the practice of the disinfection of both public and private swimming pools’ waters is consolidated, through the production of Hypochlorite directly in the pumping circuit, through electrolysis of the swimming pool’s water, previously additivated with Sodium Chloride in the measure of around 4g/lt.

The cell uses a variable number of small sized electrodes, around 100 cm2 each, and is controlled by a sensor which regulates its functioning based on the Hyper chlorite’s concentration level in the swimming pool.

The electrodes work alternatively as a cathode or an anode to the purpose of eliminating the incrustations of Carbonate of Calcium and Magnesium which form on the surface. For this reason all the electrodes are activated with the coating itself, generally Ruthenium Oxide + Iridium Oxide based and with a surface treatment of Titanium which makes them resistant to the very numerous inversions of polarity that the process requires.
We supplies both electrodes cut to measure according to the customer’s drawing and sheets of 1 m2 or more in the cases when the clients prefer to manage the cutting by themselves.

For decades, chemicals containing hypochlorite have been widely used to disinfect swimming pools, but it is easily to cause chlorine odors, red eyes, skin irritation and hair damage.

The salt water chlorine system for a swimming pool uses sodium chloride (table salt) for chlorine, and applies a small electrical voltage across two points in the water (inside the generation cell) to generate Cl·, ·OH, ClO-, and O3.

This swimming pool chlorine generator is convenient of using salt water and a chlorine generating cell to provide the sanitizer for day to day use and maintenance of the pool. Salt water feels softer on the skin and is less irritating to skin, eyes, and bathing suits than traditional chlorine treatments. It is a safer, simpler and cost effective disinfection route.

Since the salt level in your pool remains constant the process will repeat itself in that you can continue to create chlorine as you need it. Keep your pool in the range of 1-3ppm free chlorine at all times.

Typical working conditions:

Recommended salt concentration: 3-4 g/l

Water temperature: from 25 to 37 °C

PH: 6-8

The advantages of titanium electrode and Platinised Titanium Anodes in swimming pool salt water chlorine generator are:

No handling of toxic, dangerous chemicals;

Hypochlorite with no additional impurities is produced;

Disinfectant has a close to neutral pH, meaning the system is not susceptible to changes in pH;

Continuous coating improvement and cell optimization to improve coating life;

Ability to fabricate complex anode structures and provide complete assembly services for cells and complete units under OEM agreement;

Features

1) Stable working ability under high current density & Voltage

2) High electrolysis efficiency

3) Stable electrolysis ability

4) High anti-corrosion property

5) The base material can be recycled and recoated with MMO for reuse

6) Longer working life etc.

Applications Fields

Swimming pool disinfection;

Swimming pool chlorine generator;

Swimming pool salt water chlorine generator;

Salt water chlorine generator;

Salt chlorine generator;

Pool and SPA Chlorination;

salt water chlorine generator;

salt water system;

swimming pool equipment.

    Get in touch